Skip to content

How to get a PDF under 200 KB for an online form (without making it unreadable)

By Shubham · 12 September 2026 · 4 min read

If you've ever filled in an online application, you've probably seen a line like this under the upload button: "PDF only. Max size 200 KB." And your scanned mark sheet is 3.4 MB.

Upload limits like these are common on exam registration sites, recruitment portals and government services. They exist because those systems receive enormous numbers of documents, and storage adds up. The good news is that 200 KB is usually plenty for a readable one or two page document. You just need to get rid of the waste.

Here's the order I'd do things in. Most people only need the first two or three steps.

Step 1: Start with a sensible scan

Most oversized PDFs are oversized because of how they were scanned, not because of the content.

  • Scan in greyscale or black and white unless the form specifically asks for colour. A colour scan can be three or four times bigger than the same page in greyscale, and a mark sheet doesn't need colour to be read.
  • Use 150 to 200 DPI, not 600. Office scanners often default to very high resolutions meant for archiving photos. For a document, 150 to 200 DPI is sharp enough to read small print.
  • If you're using your phone, use a scanning tool like Scan to PDF instead of just taking a photo. Cropping to the page edges and whitening the background removes a lot of useless detail, and smaller images compress better.

If you can rescan, do. Fixing a bad scan later always loses more quality than scanning sensibly in the first place.

Step 2: Remove anything you don't need

Every page costs space. Before compressing, open the PDF and look for:

  • Blank backs of pages (double-sided scanners love these)
  • Instruction pages or cover sheets the portal didn't ask for
  • Duplicate pages from a re-scan

Use Delete Pages to drop them. Going from four pages to two roughly halves the size, with zero loss in quality.

Step 3: Compress to a target size

Now use a compressor that aims for a specific size. Compress PDF to 200 KB tries the highest quality that still fits under 200 KB, so you don't have to guess between "light" and "strong" settings and check the size each time. If your portal says 100 KB, use Compress PDF to 100 KB instead.

A tip: aim slightly under the limit. Some portals measure 200 KB as 200,000 bytes, others as 204,800. If your file is 199 KB by one measure, it might be just over by the other. Landing around 180 to 190 KB avoids that problem.

Step 4: Check it before uploading

This is the step people skip, and it's where rejections come from. Open the compressed file and:

  1. Zoom in to 150% on the smallest text, usually roll numbers, dates and registration numbers.
  2. Check that any signature or stamp is still visible.
  3. Check any photo on the document is still recognisable.

If you can't read something comfortably, the person verifying your application can't either. Go back a step: rescan in greyscale, or remove another page, and compress again with less force.

What if it just won't go small enough?

Sometimes a document has too much detail to fit in 100 KB and still be readable, like a dense three-page certificate full of small print. You have a few options:

  • Check whether the portal allows multiple uploads. Some do, and you can split the document with Split PDF.
  • Crop the margins. Large white margins aren't free in a scan. Crop PDF can trim them.
  • Contact the help desk. If an official document genuinely can't fit, it's worth asking. Portals sometimes accept a smaller crop of only the relevant part, but ask before assuming.

A good compressor should tell you honestly when a target can't be reached rather than handing you a blurry mess, and that's what ours does. A blurry file that's technically under 100 KB is worse than useless, because it can get your application rejected later during verification.

Photos and signatures are a separate thing

Many applications also ask for a passport photo and a signature as separate image uploads, often with even smaller limits like 20 to 50 KB and fixed pixel dimensions. Those are JPGs, not PDFs, so a PDF compressor won't help. We've written a separate guide on resizing photos and signatures for online applications.

Quick checklist

  • Scan in greyscale at 150 to 200 DPI
  • Delete blank and unnecessary pages
  • Compress to a target slightly under the limit
  • Zoom in and check every number before uploading
  • Keep the original full-quality scan saved somewhere safe

Do it in that order and you'll rarely have to fight with a size limit again.


More guides

All guides · All tools